Search found 5 matches

by Kompressorphilipp
Tue Apr 07, 2020 8:10 pm
Forum: Tutorials
Topic: Data Logger (boost, egt, afr, temperatures recording)
Replies: 16
Views: 25297

Re: Data Logger (boost, egt, afr, temperatures recording)

Hello, rpm signal from Injector works verry bad. Above 5000 rpm the rpm Jumps from 2000 to 0 and to 6000rpm. Do you know the best way for the rpm signal. Maby with the vss sensor? I have buy it in your shop. My rpm signal in the dash board and on the Radio comes from can bus. I dont have a extra cab...
by Kompressorphilipp
Tue Mar 31, 2020 10:33 am
Forum: Tutorials
Topic: Data Logger (boost, egt, afr, temperatures recording)
Replies: 16
Views: 25297

Re: Data Logger (boost, egt, afr, temperatures recording)

Hello and thank you for your awnser, where can i start and stop the Data Logger? I search the forum and the manual and i found nothing. Is there a extra screen in the screens menue? I have only activate the 3. and 4. user screen. I have push the three buttons long and short. I came in diffrent menue...
by Kompressorphilipp
Wed Mar 18, 2020 10:47 am
Forum: Tutorials
Topic: Data Logger (boost, egt, afr, temperatures recording)
Replies: 16
Views: 25297

Re: Data Logger (boost, egt, afr, temperatures recording)

Hello, i have -Datalogger off or avtivate manually-. Where can i activate the logger and where can i stop the recording?when i start next time create the logger in the csv file a new time stamp? Is it possible to log the injection time. The rpm Signal comes from the injection valve. When i modify my...
by Kompressorphilipp
Mon Mar 16, 2020 10:22 pm
Forum: UTCOMP technical support
Topic: Lambda Wert kalibration and Shiftlight
Replies: 2
Views: 3409

Re: Lambda Wert kalibration and Shiftlight

Hello, thank you for your Help! I test it in the next days. Wen i am finish i post a Foto from the fitment an my wire connections. Maby i can Help other people.
by Kompressorphilipp
Mon Mar 16, 2020 8:43 am
Forum: UTCOMP technical support
Topic: Lambda Wert kalibration and Shiftlight
Replies: 2
Views: 3409

Lambda Wert kalibration and Shiftlight

Hello, i have buy the UTCOMP PRO. I need to know what a and b by the air fuel Ratio Mean I have a Lambda gauge from England Who Shows 0-5V 7.35-22.39 AFR But i want to show it in Lambda ( :14.7 ) i have actualy a=0.21 b=0.5 it is verry close but not exakt. I have on the digi out unser a Verry Bright...

Go to advanced search

cron