Ok. As it is installed on motorbike I might think some rain water possibility on connector…but still doubt as it is very hidden/well covered spot…and all pins are clean and ok. But now it might take some time to disassemble the box and have access to open it. Good thing is display is working and sho...

Thnx! Managed to make fw update successfully. Unfortunately buttons still not working... must be issue on board then? Is there any replacement parts or whole new unit?

Yes, tried jump from UTCOMP-3 connector A1 - A15 (-A3 & -A14) but no function.
Wires and connector pins are all ok.
Sorry, yes it is UTCOMP-PRO, sticker behind W-4993. SW & FW = v3.8.0

Hi, seems like my UTCOMP-3 push buttons has lost functionality. Use to work but now even straight connections/short-cuts on connector A will not make any action. Any idea what has failed / how to fix? There use to be couple times "frozen" screen suddenly to one of windows (not default) but...

Still one question... as I have air / oil cooled engine and measuring OIL TEMP - but as understood I should use ENGINE TEMP to get this fan running symbol... I can swap ENGINE TEMP icon with OIL TEMP on "HARDWARE" -tab with "#FLASH" authorisation code, right? So can you please co...

Aha, okay. Yes I'm measuring motor oil temp and control fan according that...so then clear. Thnx a lot for your great support!

I'm using 10. User (2) as default screen and that window oil symbol will not change, neither on DigOutUser control window.

Ok. Yes output B7 in use already.

Q: Is there way to change buzzer alert output smth else than 3x 0.5-1.0 sec.? Would like to use it as 2nd DigOutUser output, but is it always this three flashes? Thnx in advance! Hi Timoes, Since I would like to use an external warning LED as soon as one of the critical values exceeds or falls below...

Aha, and if it will not, what should I do? When connected with usb-UTCOMP from Readings I can see A21 gets voltage and status changes.