i know for the most users of UTCOMP it is not very important, but would it be possible to increase the measuring range from 250 km/h to 300 km/h? I would like to log 200-300km/h times.
additional to my last post: Request for Update: Add gear indicator to datalogger, at the Moment i cant choose gear indicator in bank 0 - 9 And also My Last Post, especially shifting indicator would be nice, just let the Display flash very fast at a certain rpm. Can you add one decimal place to the 0...
I tested the new firmware + software today (couldnt drive the last days because of suspension leaking). The boost is now indicated correctly! The small fields show negativ and positiv numbers, thanks! But now i have a differnent problem: After using the new firmware+software, i have false numbers in...
Hello, i am not sure whether i did a wrong configuration or this is a bug: In big fields of the display (see photo 1), the boost pressure shows a "VAC" when in vacuum, means negative boost pressure. After building boost over 0 bar the "VAC" disappears and i can read the correct (...
Bug in v3.8.0 After activating oscilloscope für certain adc (adc5 gear indicator for me), all gear Indicator Settings are gone. Request for Update: Add gear indicator to datalogger, at the Moment i cant choose gear indicator in bank 0 - 9 And also My Last Post, especially shifting indicator would be...
Hi, i have connected +12V from my fan cooler to A21 DigInHC. Even when its not connected, the engine temperature icon always shows the fan-icon instead of the temperatur-icon. As you can see on the photo, engine temp is 61°C, fan cooler is not running (i saw the blades standing still) but the fan-ic...
Suggestions: - Option to use one ADC Input for TPS (throttle position Sensor). For example, two calibration fields: one field e.g. 1V = 0% and second field 5V = 100% A must be for data logging - Speed in the acceleration menu over 300 km/h (right know 255kmh is the limit) - Option to let the display...
I just want to say, that thanks to ArT, my Utcomp + display is workling like it did before.
Due to the fact that I short-circuited two cables, the display was defective and was repaired by ArT within a very short time. Thanks for the great service!
Is it possible to measure the map sensor to see if it is still working? apply +5v @200mA and apply 1 bar and check how the numbers equal the numbers on the datasheet?