Search found 9 matches

by g300d
Mon Nov 14, 2022 2:14 pm
Forum: UTCOMP technical support
Topic: Temp sensor possibly reading high
Replies: 1
Views: 1938

Temp sensor possibly reading high

I have been reading oil temperatures on my UTComp Pro higher than what I had before. I am using NTC temp sensors from you, programmed to UTComp based on spec sheet included with sensor. I would like to check gauges first as car has no mechanical problems, with coolant temp in normal range. Is there ...
by g300d
Fri Jul 31, 2020 11:15 am
Forum: Examples of assembly
Topic: Subaru Legacy BM9 install
Replies: 3
Views: 13224

Re: Subaru Legacy BM9 install

Sorry, just saw this! All displayed values except battery voltage (oil pressure, oil temp, boost) are from additional sensors wired directly to the UTComp module. Battery voltage looks to be derived by UTComp module from the power supply to module. Many data points can be derived but have not wired ...
by g300d
Fri Apr 05, 2019 1:40 pm
Forum: Examples of assembly
Topic: Subaru Legacy BM9 install
Replies: 3
Views: 13224

Subaru Legacy BM9 install

Just sharing. Need to fab a bezel as the display did not look so good under the tinted clock bezel as originally planned. https://i.imgur.com/g495VBD.jpg So I removed it, much better! https://i.imgur.com/Qm5FyZV.jpg Hoping to get more functions online soon! https://i.imgur.com/luOacTU.jpg https://i....
by g300d
Fri Apr 05, 2019 1:27 pm
Forum: UTCOMP technical support
Topic: What sensor for intercooler air temp?
Replies: 1
Views: 3480

What sensor for intercooler air temp?

The intercooler I bought has beem drilled for an air temp sensor post-cooler. What sensor should I use for this? The resistance sensors offered in the store dont mention air temp capability, and the digital sensors I am leery of retrofitting to the threaded hole because of the possibility of leaking...
by g300d
Fri Nov 30, 2018 2:18 pm
Forum: UTCOMP technical support
Topic: OLED display dimmer at night
Replies: 2
Views: 2697

Re: OLED display dimmer at night

I see, I misunderstood and thought that was an output, not input.

Thank you for clarifying!
by g300d
Fri Nov 30, 2018 12:43 am
Forum: UTCOMP technical support
Topic: OLED display dimmer at night
Replies: 2
Views: 2697

OLED display dimmer at night

Does UTCOMP PRO have a dim display function when the vehicle lights are switched on?

I did not find reference in the online manuals or any input in UTCOMP PRO harness for illumination that can activate a dim function.
by g300d
Sat Nov 10, 2018 6:14 pm
Forum: UTCOMP technical support
Topic: Turbo Boost/ Oil Pressure/ Oil Temp
Replies: 4
Views: 4731

Re: Turbo Boost/ Oil Pressure/ Oil Temp

I will review the link and give it a try, again, thank you. :)
by g300d
Sat Nov 10, 2018 5:22 pm
Forum: UTCOMP technical support
Topic: Turbo Boost/ Oil Pressure/ Oil Temp
Replies: 4
Views: 4731

Re: Turbo Boost/ Oil Pressure/ Oil Temp

Thank you, I appreciate the very quick reply. :) Additionally, I would like to display coolant temperature on UTCOMP PRO, taking data from existing coolant temp sensor. I understand I can tap positive line of existing sensor and attach to Adc1-4, but I must scale for output to be correct. Would you ...
by g300d
Sat Nov 10, 2018 3:40 pm
Forum: UTCOMP technical support
Topic: Turbo Boost/ Oil Pressure/ Oil Temp
Replies: 4
Views: 4731

Turbo Boost/ Oil Pressure/ Oil Temp

Hello, I just purchased a UTCOMP PRO. For turbo boost I have the Bosch 5V 3 Bar MAP sensor. For oil pressure I have 150 PSI/10 Bar 5V pressure sensor. For oil temp I have Oil and Water temp sensor NTC analog. I would like to confirm wiring for these. For MAP SENSOR: Positive to VCC (A6 or A18 or B6 ...

Go to advanced search