I'm glad that you have resolved your issue and everything worked. I recommend to operate directly on SFP (SFP[USER] in previous versions) - these procedures are based on scripts (A0/A2 is hard coded in database, that's why ND is not active - it's ok for basic operations). Furthermore - when you sele...

Generally it should save 4 bytes password in first 4 letters of manufacturer name. Seems like password was fine for single write (TEST) and then it not worked for second write. It may be implemented mechanism in SFP of changing password every write but it's quite unique. It may be also issue with wr...

Digital temperature inputs are only for DS18B20 sensors. All NTC temperature sensors and pressure sensors should be connected to analog inputs. If you are connecting NTC sensor ONLY to UTCOMP, you should connect it to AdcVccX and ground. Calibration is using resistance of the sensor. If you are conn...

Very nice, thank you for sharing it!

To jest ta pamięć z tej dokumentacji? https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2008121142_FORESEE-FS35ND01G-S1Y2QWFI000_C719495.pdf więc spróbuj ją odczytać/zapisać jako IS37SML01G1 ma tą samą organizację pamięci tj. 1024 blocks (1 plane) * 64 pages (2048+64 bytes), ECC ON (bit 4, B0) drug...

Próbujesz zasilić z programatora całą płytę główną na linii zasilania pamięci (oprócz pamięci są inne układy podłączone do tej linii), która na 100% pobiera więcej niż limit programatora. Najpierw się upewnij że czarny przewód z klipsa trafia na pin nr 1 pamięci. Następnie się upewnij przed podłącze...

Tak, ustaw odległą datę do przodu i nie będzie wyświetlał przypomnienia na ekranie.

Yes you can connect it to any AdcX input and use other value scaling which you are not using, e.g. connect is as EGT, AFR, Boost or anything else and scale it to your needs and then you can log it in datalogger.

You need to count pulses per single revolution of main shaft, usually it will be 0.5, 1x, 2x or 4x. If you enter wrong multiplier in settings you will have wrong RPM (but lineary rescaled), e.g. instead of 3000 RPM you will get 750/1500/6000/12000 RPM depends on settings. Or just check RPM with diff...

Usually crank sensor is working fine. How wrong these values are? Maybe it's divided by 2, 4 or 8 and it needs just calibration? Or is it totally random?

PS. please make sure also that you have selected RPM signal for A11 input and set RPM settings properly in advanced -> RPM