Yes it can be repaired, but all protection buffers should be replaced. I'm sending you details via PM.

Could you share me screenshot from hardware test, please? (available from the top menu).
If it's detected with USB it should be repairable.

I'm sorry but we do not have official drivers for ARM architecture. Drivers are based on libusb driver, if you find compatible libusb driver for snapdragon it should also work with revelprog

Please select EEPROM -> 93 series -> NMC -> NMC9346 and it will work.

93xx chips do not have any locking registers which require to reset before write.

Do you programming it as 8-bit or 16-bit? Which 93C46 do you have exactly? (full signature / datasheet).

Hi Ole, CAN-BUS is not supported, for EGT you will need to get amplifier output (e.g. EGT-K OUT connected to UTCOMP + EMU at the same time) and from AFR the same situation - AFR output from controller connected to EMU and to UTCOMP. RCOMP has CAN-BUS but only for basic OBD2 data (speed, rpm, boost e...

for MAP and pressures you can use simple calculator from UTCOMP app available in settings -> advanced -> pressure -> calculator and use AFR instead of bar.

Hi, based on pdf:

0V = 10 AFR
4.99V = 19,98 AFR

it will give params:
a = 2.0
b = 10.0

adcvcc1 to napięcie jest ok - jest to wejście z tzw. pullupem (podciągnięciem do zasilania) specjalnie dla czujnika NTC. Jeden przewód czujnika powinien być podłączony do masy a drugi do AdcVcc1 i tyle. ciśnienie doładowania - ciśnienie z MAP to ciśnienie absolutne, więc pokazuje aktualne ciśnienie ...

Nowa aktualizacja v1.9.2 jest już dostępna. Wymagana jest aktualizacja firmware. Dodaliśmy wsparcie dla nowych urządzeń oraz wiele drobnych zmian w tle, które zostały zaimplementowane od ostatniej aktualizacji. ⋅ dodano nową opcję do custom script: #SAVETOFILE="C:/testfile.bin"; ...