Search found 1508 matches

by ArT
Wed May 08, 2024 9:12 am
Forum: UTCOMP technical support
Topic: RPM refresh rate blocked to 1hz in dattalogging
Replies: 2
Views: 154

Re: RPM refresh rate blocked to 1hz in dattalogging

Refresh rate depends on your sensor resolution. It's physically imposible to get high refresh rate when resolution is to low. For <30imp/revolution it will be 1Hz, because there are to small number of samples to get faster readings. For >30imp/rev it will be automatically switched to 5Hz and +/- 10r...
by ArT
Fri May 03, 2024 2:31 pm
Forum: Technical Support
Topic: Programmer is not connected (V1.9.0)
Replies: 10
Views: 3247

Re: Programmer is not connected (V1.9.0)

Please show me video how do you installing drivers with Zadig - generally it should looks like on this video:
https://www.youtube.com/watch?v=6AFD3yBsRNc
by ArT
Mon Apr 29, 2024 11:38 am
Forum: UTCOMP technical support
Topic: Calibrating random oem sensors
Replies: 3
Views: 294

Re: Calibrating random oem sensors

I see standard voltage/pressure table above. Just connect signal of this sensor to AdcX input and it will work.

DS inputs are only for 1-wire communication dedicated for DS18B20 sensors - each sensor on separate wire.
by ArT
Thu Apr 25, 2024 1:00 pm
Forum: Technical Support
Topic: Found SFP28 password, but unable to write. (fs.com SFP28-25GLR-31)
Replies: 2
Views: 221

Re: Found SFP28 password, but unable to write. (fs.com SFP28-25GLR-31)

I'm glad that you have resolved your issue and everything worked. I recommend to operate directly on SFP (SFP[USER] in previous versions) - these procedures are based on scripts (A0/A2 is hard coded in database, that's why ND is not active - it's ok for basic operations). Furthermore - when you sele...
by ArT
Tue Apr 23, 2024 5:54 pm
Forum: Technical Support
Topic: Partial erase of the EEPROM during programming of a SFP
Replies: 1
Views: 129

Re: Partial erase of the EEPROM during programming of a SFP

Generally it should save 4 bytes password in first 4 letters of manufacturer name. Seems like password was fine for single write (TEST) and then it not worked for second write. It may be implemented mechanism in SFP of changing password every write but it's quite unique. It may be also issue with wr...
by ArT
Mon Apr 22, 2024 11:14 am
Forum: UTCOMP technical support
Topic: Calibrating random oem sensors
Replies: 3
Views: 294

Re: Calibrating random oem sensors

Digital temperature inputs are only for DS18B20 sensors. All NTC temperature sensors and pressure sensors should be connected to analog inputs. If you are connecting NTC sensor ONLY to UTCOMP, you should connect it to AdcVccX and ground. Calibration is using resistance of the sensor. If you are conn...
by ArT
Mon Apr 22, 2024 11:07 am
Forum: Examples of assembly
Topic: 93 F350 IDI diesel lab rat
Replies: 1
Views: 190

Re: 93 F350 IDI diesel lab rat

Very nice, thank you for sharing it! :)
by ArT
Fri Apr 19, 2024 9:13 am
Forum: Wsparcie Techniczne
Topic: Brak obsługi SPI Nand marki Foresee
Replies: 1
Views: 385

Re: Brak obsługi SPI Nand marki Foresee

To jest ta pamięć z tej dokumentacji? https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2008121142_FORESEE-FS35ND01G-S1Y2QWFI000_C719495.pdf więc spróbuj ją odczytać/zapisać jako IS37SML01G1 ma tą samą organizację pamięci tj. 1024 blocks (1 plane) * 64 pages (2048+64 bytes), ECC ON (bit 4, B0) drug...
by ArT
Mon Apr 15, 2024 9:48 am
Forum: Wsparcie Techniczne
Topic: Za duży pobór prądu
Replies: 1
Views: 80

Re: Za duży pobór prądu

Próbujesz zasilić z programatora całą płytę główną na linii zasilania pamięci (oprócz pamięci są inne układy podłączone do tej linii), która na 100% pobiera więcej niż limit programatora. Najpierw się upewnij że czarny przewód z klipsa trafia na pin nr 1 pamięci. Następnie się upewnij przed podłącze...
by ArT
Mon Apr 15, 2024 9:43 am
Forum: Wsparcie Techniczne
Topic: Inspekcja wyłączenie
Replies: 2
Views: 505

Re: Inspekcja wyłączenie

Tak, ustaw odległą datę do przodu i nie będzie wyświetlał przypomnienia na ekranie.

Go to advanced search