Hi Florin, I'm sorry but it's not supported. Supported serial interfaces are SPI, I2C, 1-wire and microwire and supported device list is here: https://www.reveltronics.com/en/products/revelprog-is-serial-memory-programmer-usb#supported-chips There is also custom script tools which allow to write own...

UTCOMP has built in 2x goldcaps 1F inside (super capacitors) so short power failures (up to 3 seconds) should not be the case. You can test if these caps are working properly by setting trip summary screen e.g. to 10 seconds, disconnect power supply and measure how long screen is displayed until UTC...

Refresh rate depends on your sensor resolution. It's physically imposible to get high refresh rate when resolution is to low. For <30imp/revolution it will be 1Hz, because there are to small number of samples to get faster readings. For >30imp/rev it will be automatically switched to 5Hz and +/- 10r...

Please show me video how do you installing drivers with Zadig - generally it should looks like on this video:
https://www.youtube.com/watch?v=6AFD3yBsRNc

I see standard voltage/pressure table above. Just connect signal of this sensor to AdcX input and it will work.

DS inputs are only for 1-wire communication dedicated for DS18B20 sensors - each sensor on separate wire.

I'm glad that you have resolved your issue and everything worked. I recommend to operate directly on SFP (SFP[USER] in previous versions) - these procedures are based on scripts (A0/A2 is hard coded in database, that's why ND is not active - it's ok for basic operations). Furthermore - when you sele...

Generally it should save 4 bytes password in first 4 letters of manufacturer name. Seems like password was fine for single write (TEST) and then it not worked for second write. It may be implemented mechanism in SFP of changing password every write but it's quite unique. It may be also issue with wr...

Digital temperature inputs are only for DS18B20 sensors. All NTC temperature sensors and pressure sensors should be connected to analog inputs. If you are connecting NTC sensor ONLY to UTCOMP, you should connect it to AdcVccX and ground. Calibration is using resistance of the sensor. If you are conn...

Very nice, thank you for sharing it!

To jest ta pamięć z tej dokumentacji? https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2008121142_FORESEE-FS35ND01G-S1Y2QWFI000_C719495.pdf więc spróbuj ją odczytać/zapisać jako IS37SML01G1 ma tą samą organizację pamięci tj. 1024 blocks (1 plane) * 64 pages (2048+64 bytes), ECC ON (bit 4, B0) drug...