Hi, I had a 2.5bar turbo sensor
Now I'm fitting a 3 bar turbo sensor.
Is this configuration correct?
I would like to read the real bars without the absolute
Thank you
I attach images
turbo pressure sensor calibration
-
Massimiliano
- Posts: 2
- Joined: Wed Oct 18, 2023 2:59 am
turbo pressure sensor calibration
- Attachments
-
- 0281002996.png (68.6 KiB) Viewed 144 times
-
- 0281002996 utcomp.png (31.66 KiB) Viewed 144 times
-
ArT
- Posts: 1464
- Joined: Wed Mar 25, 2015 8:54 am
- Location: Warsaw, Poland
- Has thanked: 50 times
- Been thanked: 149 times
Re: turbo pressure sensor calibration
MAP sensor is absolute pressure sensor.
These values will give absolute pressure.
For turbo pressure, you can deduct 1.0 bar if you are living on sea level, so based on your calibration data it will be:
a = 0.66
b = -0,89 (with minus)
These values will give absolute pressure.
For turbo pressure, you can deduct 1.0 bar if you are living on sea level, so based on your calibration data it will be:
a = 0.66
b = -0,89 (with minus)
-
Massimiliano
- Posts: 2
- Joined: Wed Oct 18, 2023 2:59 am
Re: turbo pressure sensor calibration
perfect thank you very much
my installation on clio rs3 swaps megane rs2
my installation on clio rs3 swaps megane rs2
- Attachments
-
- 1697791599944.jpg (1.8 MiB) Viewed 142 times
-
- 1697791599950.jpg (1.49 MiB) Viewed 142 times
Return to “UTCOMP technical support”
Who is online
Users browsing this forum: No registered users and 1 guest