Calibration for VDO 360009

Here you can ask technical questions about UTCOMP-3 / UTCOMP-PRO compatibility and features.
baltik
Posts: 1
Joined: Mon Jul 30, 2018 8:08 am

Calibration for VDO 360009

Postby baltik » Mon Jul 30, 2018 8:14 am

Hello - I am interested in using a VDO oil pressure sender. I was curious if anyone has successfully calibrated this, since I do not see any reference numbers online

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: Calibration for VDO 360009

Postby ArT » Mon Jul 30, 2018 11:27 am

Do you have output table for this sensor?
If not, you can measure it with manometer. Output voltage for 2 different pressures will be enough, e.g.
1 bar (atmospheric pressure) = ... ohm or volts
3 bar (or any other) = ... ohm or volts


Return to “UTCOMP technical support”

Who is online

Users browsing this forum: No registered users and 14 guests