Black screen and buzzer beeps

Here you can ask technical questions about UTCOMP-3 / UTCOMP-PRO compatibility and features.
Takegawa
Posts: 1
Joined: Wed Jan 23, 2019 8:34 pm

Black screen and buzzer beeps

Postby Takegawa » Wed Jan 23, 2019 8:40 pm

Hi. I have recently mounted my new utcomp Pro. Very nice unit! But about every second time i start the car, the utcomp having a black screen and buzzer goes of like beeeeeeeep.. whats wrong?

Best regards Johnny

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: Black screen and buzzer beeps

Postby ArT » Thu Jan 24, 2019 11:09 am

It seems that your UTCOMP module is resetting every time you run the car. It seems to me that you have not connected +12V power from battery (pin A24) - only 12V from ignition and UTCOMP does not have power when you switch off. It has inside small super capacitors so it can work without power only few seconds, but when voltage drops it will reset and you will have "beep" at cold start. Just connect +12V BAT to A24 and it will be fine.


Return to “UTCOMP technical support”

Who is online

Users browsing this forum: Bing [Bot] and 5 guests

cron