Bouncing fuel pressure sensor

Here you can ask technical questions about UTCOMP-3 / UTCOMP-PRO compatibility and features.
ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: Bouncing fuel pressure sensor

Postby ArT » Fri Mar 08, 2019 10:12 am

Great, thanks for feedback. I can make you further averaging for this one input if you wish. Is it Adc1?
At the moment I set you 0.4s (was 0.1s before) but can make 1s (and it will decrease refreshing rate for this input to 1Hz).

svein
Posts: 22
Joined: Wed Jan 09, 2019 4:51 pm
Has thanked: 8 times
Been thanked: 1 time

Re: Bouncing fuel pressure sensor

Postby svein » Fri Mar 08, 2019 1:29 pm

That is very kind of you to offer!
At the moment, I am able to read the pressures, and it´s good to know that the readings from the gauges are the same. It would perhaps be more interesting to see how the readings would be with 0.6s averaging for all the inputs if you don´t mind?

Thank you so much again!
Cheers,
Svein

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: Bouncing fuel pressure sensor

Postby ArT » Sun Mar 10, 2019 9:30 pm

will try to prepare customizable averaging from software
I'll let you know soon ;)

BR
Artur

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: Bouncing fuel pressure sensor

Postby ArT » Tue Mar 12, 2019 1:34 pm

Dear Svein,

I've sent you on PM new firmware and app for tests.
You will need to update UTCOMP the same as before, but you will also need to replace UTCOMP windows application file (in installation folder, by default it is C:\Program Files (x86)\REVELTRONICS\UTCOMP). Then you will see new "Adc" tab in advanced settings, where you can set averaging time for sensors. For 600ms averaging please enter 30 samples for each pressure and save settings. You can also enter any other higher value (1 sample = 20ms conversion time, so each +100ms = +5 samples). Please let me know when you test it.

Cheers,
Artur
Attachments
v3-7-1-rc2-beta.jpg
v3-7-1-rc2-beta.jpg (80.26 KiB) Viewed 5354 times

svein
Posts: 22
Joined: Wed Jan 09, 2019 4:51 pm
Has thanked: 8 times
Been thanked: 1 time

Re: Bouncing fuel pressure sensor

Postby svein » Wed Mar 13, 2019 8:47 pm

Again I have to say that this is really amazing customer service! So cool!! :D

I installed the new firmware and software today and played around with the numbers. Started with 800ms average (40 samples) which was dead steady, and after driving around and changing it a bit I settled for the 600ms average (30 samples) in the end. This gives a much better indication of the actual pressure at the IP than the bouncing numbers I saw before. Thank you so much!!

X
Svein

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: Bouncing fuel pressure sensor

Postby ArT » Mon Mar 18, 2019 11:03 am

Great, thanks for testing it :)


Return to “UTCOMP technical support”

Who is online

Users browsing this forum: No registered users and 7 guests