Utcomp Pro forgets date

Here you can ask technical questions about UTCOMP-3 / UTCOMP-PRO compatibility and features.
Horst
Posts: 2
Joined: Sat Apr 13, 2019 2:40 pm
Has thanked: 1 time

Utcomp Pro forgets date

Postby Horst » Sat Apr 13, 2019 2:54 pm

Hi,

My Utomp Pro forgets the date after the ignition has been turned off.

I set the date to: 13.04.2019 , 14:40 -> turn off -> turn on and the date jumps up to 01.01.2019 , 00:00
I have tried it several times but it does not work.

The service reminder and the traveled distance etc are displayed correctly. So i dont know whats the problem.

What could it be?

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: Utcomp Pro forgets date

Postby ArT » Mon Apr 15, 2019 1:23 pm

The problem is that you do not have connected constant +12V at pin A24. When you switch off ignition you should still have +12V at pin A24.

The other reason may be in settings (Settings -> preferences -> standbymode) - if you want to use clock you should select "power-safe" mode (NOT ultra power-safe where watch is disabled).

Horst
Posts: 2
Joined: Sat Apr 13, 2019 2:40 pm
Has thanked: 1 time

Re: Utcomp Pro forgets date

Postby Horst » Mon Apr 15, 2019 4:01 pm

Yes the "ultra power save" mode was my fault. Thanks a lot :)


Return to “UTCOMP technical support”

Who is online

Users browsing this forum: No registered users and 8 guests

cron