5V or 12V for oil transducer

Here you can ask technical questions about UTCOMP-3 / UTCOMP-PRO compatibility and features.
Pistou
Posts: 42
Joined: Sat Dec 05, 2020 7:06 am
Been thanked: 3 times

5V or 12V for oil transducer

Postby Pistou » Tue Dec 08, 2020 9:33 pm

Hello,

The oil pressure sensor webpage indicates 5V recommended, shall I buy a regulator or the 12V is ok?

Thanks

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: 5V or 12V for oil transducer

Postby ArT » Wed Dec 09, 2020 9:07 am

REVELTRONICS pressure sensor (this one https://www.reveltronics.com/en/shop/60 ... -5v-detail) has built in regulator and internal protection so +12V is 100% fine. It's claimed +5V because it's a such standard for oil transducer, but our sensor will work also with +12V so you can go ahead with voltage from car installation.

Pistou
Posts: 42
Joined: Sat Dec 05, 2020 7:06 am
Been thanked: 3 times

Re: 5V or 12V for oil transducer

Postby Pistou » Wed Dec 09, 2020 9:35 am

Thank you Art !


Return to “UTCOMP technical support”

Who is online

Users browsing this forum: No registered users and 8 guests