Calibration for an AEM Wideband UEGO

Here you can ask technical questions about UTCOMP-3 / UTCOMP-PRO compatibility and features.
danman2380
Posts: 13
Joined: Mon Aug 08, 2022 9:22 am
Has thanked: 3 times
Been thanked: 1 time

Calibration for an AEM Wideband UEGO

Postby danman2380 » Mon Aug 08, 2022 9:34 am

Hey there,
i would like to connect an AEM UEGO AFR Sensor Controller to my UTCOMP Pro.
Does anyone have the correct Settings/Calibration Details for me?

Thanks in Advance
Daniel

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: Calibration for an AEM Wideband UEGO

Postby ArT » Tue Aug 09, 2022 1:10 pm

Could you share link to manual or datasheet of your wideband controller, please? I'll help you calculate correct parameters for software

danman2380
Posts: 13
Joined: Mon Aug 08, 2022 9:22 am
Has thanked: 3 times
Been thanked: 1 time

Re: Calibration for an AEM Wideband UEGO

Postby danman2380 » Wed Aug 10, 2022 5:35 pm


danman2380
Posts: 13
Joined: Mon Aug 08, 2022 9:22 am
Has thanked: 3 times
Been thanked: 1 time

Re: Calibration for an AEM Wideband UEGO

Postby danman2380 » Wed Aug 10, 2022 6:43 pm


ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: Calibration for an AEM Wideband UEGO

Postby ArT » Thu Aug 11, 2022 10:19 am

Actually on page 10/13 are all required information:
0-5V Analog Output Scaling Formula
AFR = (2.3750 * Volts) + 7.312


a = 2.38
b = 7.31

danman2380
Posts: 13
Joined: Mon Aug 08, 2022 9:22 am
Has thanked: 3 times
Been thanked: 1 time

Re: Calibration for an AEM Wideband UEGO

Postby danman2380 » Thu Aug 11, 2022 11:23 am

Thank you Art,

sorry for my Dumbness. Im all new to this Stuff.

Daniel

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: Calibration for an AEM Wideband UEGO

Postby ArT » Thu Aug 11, 2022 11:56 am

It's no problem, don't worry :-) Please feel free to ask if you will have any further questions.

danman2380
Posts: 13
Joined: Mon Aug 08, 2022 9:22 am
Has thanked: 3 times
Been thanked: 1 time

Re: Calibration for an AEM Wideband UEGO

Postby danman2380 » Thu Aug 11, 2022 12:11 pm

Just tested your Calibration Settings,
AFR showing up has the same Value as on the AEM Gauge.

Thanks for your Help!


Cheers!


Return to “UTCOMP technical support”

Who is online

Users browsing this forum: No registered users and 4 guests