88-91 Honda CRX

Have you already installed UTCOMP? Share it with others!
JasonD
Posts: 3
Joined: Wed Aug 03, 2022 11:32 pm
Been thanked: 1 time

88-91 Honda CRX

Postby JasonD » Sat Sep 17, 2022 3:33 pm

I designed an adapter bezel so the screen installs into the original clock location. For other CRX owners, the original housing must be modified a little for clearance in order for the screen to be centered. You could also shift the window opening and mounting tabs to avoid this but the screen would be a little off center vertically. I attached the screen to the bezel by putting a tiny dab of epoxy on each of the 4 posts, not much at all. I also sanded and cleaned up the print to make it look less like the typical 3d printed texture. Thank you Art for answering all my questions and producing this awesome product. I will put a link here to the STL file for the bezel.

https://www.thingiverse.com/thing:5516812

IMG_2829.jpg
IMG_2829.jpg (2.24 MiB) Viewed 26 times

IMG_2781.jpg
IMG_2781.jpg (3.11 MiB) Viewed 26 times

IMG_2780.jpg
IMG_2780.jpg (3.21 MiB) Viewed 26 times

Return to “Examples of assembly”

Who is online

Users browsing this forum: No registered users and 1 guest