UTCOMP-3 and UTCOMP-PRO

Update notes, news and general discussion about UTCOMP.
ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

UTCOMP-3 and UTCOMP-PRO

Postby ArT » Wed Mar 25, 2015 6:55 pm

Latest comparison UTCOMP-3 vs. UTCOMP-PRO - check it here

Some of you already know (from various sources ;) )that we are working on new versions of UTCOMP-3 (version 3.0) and UTCOMP-PRO. It should be available in the second half of April. Now I'm giving you few information about new modules.

edit: UTCOMP-3 and UTCOMP-PRO are available since 22th April '15

General info:

  • UTCOMP-3 is the successor of UTCOMP 2.5,
  • UTCOMP-PRO is more advanced version of UTCOMP,
  • UTCOMP is compatible with LCD 2,5" and OLED 2,3" displays - both 122x32 pix,
  • UTCOMP-PRO is compatible with OLED 3,2" 256x64pix display,
  • UTCOMP-PRO has more inputs and supports more sensors,

Main differences between UTCOMP-3 and UTCOMP 2.5:
  • new module is compatible also with 24V installation,
  • less current consumption (energy saving),
  • LCD contrast adjust on the buttons,
  • pinout compatible with 2.5 version,
  • display compatible with 2.5 version,
  • more possibilities of input configuration, e.g. there is possibility to use additional resistance/NTC sensor (with power supply from UTCOMP) and connect to factory one as well (buffered input),
  • possibility to assign temperatures to sensors, e.g. engine/oil temperature can be measured from digital or analog sensors,
  • additional pressure measurement (e.g. there is possibility to measure boost pressure and oil pressure at the same time),
  • additional alerts (all temperatures, voltage, turbo pressure, oil pressure, AFR, EGT, fuel level, speed limit),
  • analog inputs can be labeled on oscilloscope.

Main differences between UTCOMP-PRO and UTCOMP-3:
  • bigger OLED display with higher resolution available in 4 colours,
  • 5 more analog inputs (total 7),
  • 2 more digital temperature sensors DS18B20 (total 4)
  • additional digital input (e.g. for RPM),
  • additional digital output (e.g. relay control 5V/100mA) - reserved for future use and custom firmwares,
  • additional external FLASH memory (user can change OLED graphics, data-logger),
  • data-logger - recording up to 10 parameters,
  • new 16-pin display connector (longer tape possible),
  • 3 additional configurable user screens with new templates (total 4 user screens).

Pictures:
utcomp_vs_utcomp-pro.jpg
UTCOMP-3 vs UTCOMP-PRO
utcomp_vs_utcomp-pro.jpg (38.32 KiB) Viewed 15461 times

UTCOMP-PRO_user_screens.jpg
OLED 3,2" for UTCOMP-PRO
UTCOMP-PRO_user_screens.jpg (158.74 KiB) Viewed 15461 times

OLED23vsOLED32.jpg
OLED 2,3" (UTCOMP) vs OLED 3,2" (UTCOMP-PRO)
OLED23vsOLED32.jpg (159.61 KiB) Viewed 15461 times

minitruck
Posts: 1
Joined: Sun Mar 29, 2015 4:53 pm

Re: UTCOMP-3 and UTCOMP-PRO

Postby minitruck » Sun Mar 29, 2015 4:55 pm

damn, that looks very nice!
maybe I should have waited ordering mine, because I just ordered today... :x

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: UTCOMP-3 and UTCOMP-PRO

Postby ArT » Sun Mar 29, 2015 6:11 pm

Please check your PM, just sent you one.

logkeeper
Posts: 4
Joined: Tue Mar 31, 2015 7:20 pm
Location: Minsk, Belarus
Has thanked: 1 time
Contact:

Re: UTCOMP-3 and UTCOMP-PRO

Postby logkeeper » Tue Mar 31, 2015 7:27 pm

Great news.
I think to buy version 2.5
Now wait for the release of version 3, or MDP
Estimated cost?
Thank U

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: UTCOMP-3 and UTCOMP-PRO

Postby ArT » Tue Mar 31, 2015 8:22 pm

~80 EUR for UTCOMP-3 LCD 2,5",
~110 EUR for UTCOMP-3 OLED 2,3",
~160 EUR for UTCOMP-PRO (OLED 3,2")
Prices may slighty change due to exchange rate.
UTCOMP 2.5 will be still in the offer (~65 EUR).
We will share info at our page and at facebook - propably in 2-3 weeks.

logkeeper
Posts: 4
Joined: Tue Mar 31, 2015 7:20 pm
Location: Minsk, Belarus
Has thanked: 1 time
Contact:

Re: UTCOMP-3 and UTCOMP-PRO

Postby logkeeper » Tue Mar 31, 2015 8:28 pm

UTCOMP-3 OLED 3,2 "how much can it cost?
160 euros I think expensive
But wait the final price
Later, ask questions about the connections.
Thank U

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: UTCOMP-3 and UTCOMP-PRO

Postby ArT » Tue Mar 31, 2015 8:32 pm

Yep, OLED 3,2" is quite expensive on the market but it's awesome display.
We will share user manual for UTCOMP-PRO in few days.
Generally, main 24-pin socket is the same in all UTCOMPs.

logkeeper
Posts: 4
Joined: Tue Mar 31, 2015 7:20 pm
Location: Minsk, Belarus
Has thanked: 1 time
Contact:

Re: UTCOMP-3 and UTCOMP-PRO

Postby logkeeper » Tue Mar 31, 2015 8:34 pm

ok
I will wait.

logkeeper
Posts: 4
Joined: Tue Mar 31, 2015 7:20 pm
Location: Minsk, Belarus
Has thanked: 1 time
Contact:

Re: UTCOMP-3 and UTCOMP-PRO

Postby logkeeper » Tue Apr 21, 2015 6:25 pm

Good day.
What news?

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: UTCOMP-3 and UTCOMP-PRO

Postby ArT » Wed Apr 22, 2015 10:53 am

New UTCOMP-3 and UTCOMP-PRO are available starting today :mrgreen:


Return to “UTCOMP News, Updates and Other”

Who is online

Users browsing this forum: No registered users and 4 guests

cron