Programmer is not connected (V1.9.0)

[woko]

Dear Revelprog Team,

my Revelprog-IS Software updated itself to V1.9.0 and I have Problems with the driver installation.
I tried under Help/install driver and install driver (zadig) but both fail (Driver installation cancelled by user)
The device is found in the Zadig Tool.

Thx for your help!
Wolfgang

[ArT]

Hi Wolfgang,

Which version did you have before update? I'm asking because since v1.3 driver is the same.

[woko]

I don't know. Did not use it for a long time.

[ArT]

If you had v1.2.x or older - you need to uninstall manually driver from device manager (red led should blink) and then install it as described in manual.
If you had v1.3.x or newer - it should work with the same driver.

Does RED LED:
1. is off
2. is blinking
3. is on?

1 means that programmer has not power supply or is damaged
2 means that programmer is working but driver is not installed correctly
3 means that programmer is working and driver is installed correctly

[woko]

The red LED is slowly blinking.
I try installing the driver, it looks exactly like seen in the Youtube Video.
But after I press "install Driver" it hangs (not responding). Yesterday, a Message box with "Driver installation cancelled by user" came up.

[ArT]

I think that's system issue, something external is blocking driver installation. Please check it on other PC, it will work.

[woko]

had the same problem again, I think its because the driver is not signed

[woko]

it worked now, by disabling temporary the sign check. You should consider singing the driver in the future.

https://www.driversupport.com/knowledge ... ut%20issue

[ArT]

Zadig installs signed driver so I worry that issue has to be in different place