REVELTRONICS

do you plan to support the SPI Flash MT25QL128A?
Best regards,
Wolfgang

this is a kind reminder

woko, I'm sorry I have missed your post..

I have not such memory for tests but have you tried as FLASH > 25 series -> 25..128[PP] ?
Eventually as FLASH -> 25 series -> Micron -> N25Q128A13 - it should be compatible.

edit: this is old thread - device is already supported with REVELPROG-IS!

Dear ArT,

it does not seem to work.

We tested:
25..128 3,3V Verification error
25..128 [BP] 3,3V Verification error
25..128 [WP] 3,3V Verification error
25..128[PP] 3,3V Verification error
N25Q128A13 3,3V Verification error
N25Q128A11 3,3V Verification error
25Q128BV 3,3V Verification error
25Q128FV 3,3V Verification error
25Q128FW 3,3V Verification error

Have you tested in SOIC adapter or in external circuit?
Does it erase?
Where did you found this chip? (what hardware?) I'd like to order 1pcs for tests but can not find it in local stores.

It was tested with the external clip, but the art alone.
I just had blanks, so I do not know if it erase.
We ordered the part from ARROW.

I could send 2pcs over, if you want

It will be great. When we will have device for tests, than there is >90% chance that we will make it compatible.
We will send it back when we add it and test it.
Please check your PM .

you should get the flashes by next week and you can keep them

Wow, we have received it today. It was incredibly fast. Thank you.
We get to work and I'll let you know about results till tomorrow or on Monday.