EN25Q64 programmer for NEXX router WT3020H

Here you can ask technical questions about REVELPROG-IS and device/memory programming.
nexx
Posts: 2
Joined: Mon Apr 02, 2018 7:31 pm
Has thanked: 1 time

EN25Q64 programmer for NEXX router WT3020H

Postby nexx » Mon Apr 02, 2018 7:35 pm

hello, I need to repair firmware in NEXX WT3020h mini router and need programmer for serial flash:
NEXX WT3020H EN25Q64 flash.jpg
NEXX WT3020H EN25Q64 flash.jpg (70.43 KiB) Viewed 2789 times

this is probably EN25Q64 but I found on forum that it can be also W25Q64 or W25Q128..
does revelprog support all these chips??

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: EN25Q64 programmer for NEXX router WT3020H

Postby ArT » Tue Apr 03, 2018 7:52 am

All these chips are supported in all variants (e.g. EN25Q64, W25Q64BV, W25Q128FV etc.) by REVELPROG-IS. Generally if you know that it is 64Mbit 3V flash then you do not need to know exact symbol because REVELPROG-IS has "smart" procedures for programming (it is enough when you select FLASH -> 25 series -> 25..64 for any 64Mbit flash), but you can also use "Read ID" function to identify the chip (so you will see if it is 128Mbit variant on not). I see on picture it is SOIC-8 208mil package, so you will need adapter for this chip (SOIC-8 200mil) or SOIC clip for icsp.

nexx
Posts: 2
Joined: Mon Apr 02, 2018 7:31 pm
Has thanked: 1 time

Re: EN25Q64 programmer for NEXX router WT3020H

Postby nexx » Tue Apr 10, 2018 9:44 pm

hi Art. I received programmer. it arrived very quickly. it was w25q64fv. I reprogrammed it without problems... thank you for great support! I'll recommend revelprog to my friends because it is simple in use and quality is good.


Return to “Technical Support”

Who is online

Users browsing this forum: Bing [Bot] and 19 guests