REVELTRONICS

Hey guys,

So I wanted to read a motherboard yesterday but everytime I tried it gave me a warning about s
Power protection or some sort of it.

Even if I made the volt voltage lower or even disabled it. It kept giving that message.

And is there a beginner tutorial to learn everything about reading chips

Thanks a lot in advance

Are you sure that connections are fine?
Does programmer is still functional (does it pass hardware test?)

In Chapter 5 in manual there are a lot of information about in circuit programming. But if you are beginner I recommend you to programm in socket or adapter, because ICSP requires a lot of experience from user and it may be not safe in many cases (in socket is 100% safe).

Thanks alot, i have bypass the power supply problem now

But the other problem now is that the test clip im using for reading a EEPROM is not working. The software is setup perfect. But whatever i try, i can not read my chip from the motherboard using a test clip 8 pins. Anybody have a solution?

What type of chip do you try to read/write and what is the name of motherboard?