UTCOMP-3 vs UTCOMP-PRO [COMPARISON]
Posted: Fri Sep 30, 2016 3:25 pm
General information:
Hardware differences between UTCOMP-3 and UTCOMP-PRO:
Displays:
Digital inputs:
(e.g. for speed signal, fuel consumption, rpm, lpg etc.)
Digital outputs:
(e.g. output control relay switch depends on temperature/speed)
Analog inputs:
(e.g. for analog pressure sensors, temperature sensors, AFR, EGT etc.)
Analog measurements accuracy:
(each PRO version has internal calibrated voltage reference for ADC converter and it has better accuracy for analog measurements, e.g. signal measurement from pressure sensors, temperature sensors, AFR, EGT etc.)
Digital temperature inputs (DS18B20):
Total no of temperatures:
(analog + digital)
Additional features in UTCOMP-PRO
- UTCOMP-PRO is more advanced version of UTCOMP,
- UTCOMP-3 is compatible with LCD 2,5" and OLED 2,3" displays - both 122x32 pix,
- UTCOMP-PRO is compatible with OLED 3,2" 256x64pix display,
- UTCOMP-PRO has more inputs and supports more sensors,
- UTCOMP-PRO has digital output e.g. for relay switch
- UTCOMP-PRO has additional flash memory, e.g. for data-logger
Hardware differences between UTCOMP-3 and UTCOMP-PRO:
Displays:
- UTCOMP-3: 40-pin display connector, 0.6m ribbon cable, monochrome LCD 2,5" 122x32pix or OLED 2,3" 122x32pix,
- UTCOMP-PRO: 16-pin display connector, 1m (or longer) ribbon cable, OLED 3,2" 256x64pix
Digital inputs:
(e.g. for speed signal, fuel consumption, rpm, lpg etc.)
- UTCOMP-3: 4x
- UTCOMP-PRO: 5x
Digital outputs:
(e.g. output control relay switch depends on temperature/speed)
- UTCOMP-3: none
- UTCOMP-PRO: 1x - more info
Analog inputs:
(e.g. for analog pressure sensors, temperature sensors, AFR, EGT etc.)
- UTCOMP-3: 3x = 2xAdcX (0-5V) + 1xAdcVccX (5V)
- UTCOMP-PRO: 7x = 4xAdcX (0-5V) + 1x AdcX (0-30V) + 2xAdcVccX (5V)
Analog measurements accuracy:
(each PRO version has internal calibrated voltage reference for ADC converter and it has better accuracy for analog measurements, e.g. signal measurement from pressure sensors, temperature sensors, AFR, EGT etc.)
- UTCOMP-3: +/- 0,05V
- UTCOMP-PRO: +/- 0,02V
Digital temperature inputs (DS18B20):
- UTCOMP-3: 2x
- UTCOMP-PRO: 4x
Total no of temperatures:
(analog + digital)
- UTCOMP-3: 3x
- UTCOMP-PRO: 6x
Additional features in UTCOMP-PRO
- Data-Logger (data recorder)
- Digital output control (e.g. relay switch) depends on temperature or speed on input
- HUD (Head-Up Display) mode
- Custom icons and graphics
- better accuracy for analog readings (each UTCOMP-PRO module has calibrated analog circuit)
- more user configurable screens