Page 2 of 2

Re: I2C SPI Custom Script Programming [TUTORIAL & EXAMPLES]

Posted: Tue Jan 08, 2019 11:02 pm
by laptopuri
We need a toool for reading and writing JTAG on varios laptops . Can revelprog read and write on this bus ?
Regards , Vlad

Re: I2C SPI Custom Script Programming [TUTORIAL & EXAMPLES]

Posted: Wed Jan 09, 2019 2:57 pm
by ArT
Hi Vlad, unfortunately REVELPROG-IS does not support JTAG interface at the moment.

Re: I2C SPI Custom Script Programming [TUTORIAL & EXAMPLES]

Posted: Tue Feb 12, 2019 12:26 pm
by ArT
Since v1.8.1 REVELPROG-IS will be supporting 1-wire interface in custom script tool. Here is example for DS2436 battery chip: viewtopic.php?f=22&t=436&p=2143

Re: I2C SPI Custom Script Programming [TUTORIAL & EXAMPLES]

Posted: Fri Jul 31, 2020 10:21 am
by ovidiugabrielstan
Hello, can you please help me with some details about the following problem: I would like to use revelprog-is programmer together with some other microcontroller programmers, using a .bat file. This would allow me to 'automate' the programming process of a custom made board. I am using the revelprog-is programmer to flash a binary file for a FPGA device, memory type ISSI IS25LP064, which works great using GUI.

Is it possible to use revelprog-is programmer from the command line? Something like C:\path\revelprog-is.exe <memory_type> <operation_type> <binary_file>

For example: C:\path\revelprog-is.exe IS25LP064 -Write C:\myBinFile.bin

If such a feature exists, can you please direct me to a manual/description? I can't use the scripting tool, as it would be a lot easier to just use the GUI for that matter.
If this feature isn't available, can you please plan it for a future release? It would make the revelprog-is programmer a must for many others I believe.

Thank you and have a nice day,
Ovidiu Gabriel

Re: I2C SPI Custom Script Programming [TUTORIAL & EXAMPLES]

Posted: Fri Jul 31, 2020 12:17 pm
by ArT
Unfortunately REVELPROG-IS application is GUI based. We have in plans command line interface but it needs to write new app from scratch to make it GUI independent. We have it in plans but I can not promise any date at the moment so at the moment I recommend to find other solution. Please check also this subject viewtopic.php?f=22&t=415&start=10 last @bigendian post - he prepared command line software for his own (for linux) and it's working with few FLASH devices