Question about power supply

Here you can ask technical questions about REVELPROG-IS and device/memory programming.
Mtime
Posts: 2
Joined: Tue Apr 02, 2019 12:11 pm

Question about power supply

Postby Mtime » Tue Apr 02, 2019 12:14 pm

Hey guys,

So I wanted to read a motherboard yesterday but everytime I tried it gave me a warning about s
Power protection or some sort of it.

Even if I made the volt voltage lower or even disabled it. It kept giving that message.

And is there a beginner tutorial to learn everything about reading chips

Thanks a lot in advance

ArT
Posts: 1497
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 51 times
Been thanked: 160 times

Re: Question about power supply

Postby ArT » Tue Apr 02, 2019 7:53 pm

Are you sure that connections are fine?
Does programmer is still functional (does it pass hardware test?)

In Chapter 5 in manual there are a lot of information about in circuit programming. But if you are beginner I recommend you to programm in socket or adapter, because ICSP requires a lot of experience from user and it may be not safe in many cases (in socket is 100% safe).

Mtime
Posts: 2
Joined: Tue Apr 02, 2019 12:11 pm

Re: Question about power supply

Postby Mtime » Wed Apr 03, 2019 12:44 pm

Thanks alot, i have bypass the power supply problem now

But the other problem now is that the test clip im using for reading a EEPROM is not working. The software is setup perfect. But whatever i try, i can not read my chip from the motherboard using a test clip 8 pins. Anybody have a solution?

Pityu
Posts: 28
Joined: Mon Apr 10, 2017 11:04 am
Has thanked: 1 time
Been thanked: 6 times

Re: Question about power supply

Postby Pityu » Sat Jun 08, 2019 3:57 pm

What type of chip do you try to read/write and what is the name of motherboard?


Return to “Technical Support”

Who is online

Users browsing this forum: No registered users and 5 guests