Dear Customers - REVELTRONICS company will be closed from 13th Sept to 25th Sept. Support will be limited during this time. We are sorry for inconvenience. Thank you in advance for your patience.

Update v3.7 for UTCOMP-3 and UTCOMP-PRO

General discussion about UTCOMP.
ArT
Posts: 834
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 16 times
Been thanked: 80 times

Update v3.7 for UTCOMP-3 and UTCOMP-PRO

Postby ArT » Thu Nov 29, 2018 1:38 pm

And here it is.. v3.7 update for UTCOMP-3 and UTCOMP-PRO 8-)

Who can update and how to update?

Update is free for all and it will work with all UTCOMP-3 and UTCOMP-PRO modules. You can download latest UTCOMP software from REVELTRONICS UTCOMP product page

Update process is described in update manual (in software: menu help -> manuals). If you have troubles into switching to DFU (update mode) than you should clear device memory by pressing CTRL + ALT + SHIFT + R in software (all settings and statistics will be erased!) and update after that. You should save default settings to UTCOMP after update (CTRL + ALT + R)

Changelog v3.7 for UTCOMP-3 and UTCOMP-PRO

  • added support for UTCOMP Android v0.1.3 (with data-logger feature) - please take a look at UTCOMP Android app on forum
  • added conditional alert for EGT and AFR (alerts can be ignored when boost pressure is below 0,3bar)
  • added summary screens (current and last) to TRIP screen (press SW3 to switch)
  • fixed digits refreshing for few areas
  • fixed bug when alert triggered during stats resetting

Your feedback

I would like to use this oportunity to encoruage you to write a review about UTCOMP-3 or UTCOMP-PRO on product site, UTCOMP Facebook profile, UTCOMP Android app (Google Play) or in any place on the internet 8-) If you have suggestions for next updates please share it on forum in dedicated topic. Your opinion is important to us! Thank you! :)

Changelog for previous updates:
Update v3.6
Update v3.5
Update v3.4
Update v3.3
Update v3.2

ArT
Posts: 834
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 16 times
Been thanked: 80 times

Re: Update v3.7 for UTCOMP-3 and UTCOMP-PRO

Postby ArT » Mon Apr 29, 2019 12:58 pm

There is already available v3.7.1 minor update for interested users:
- speed measurement up to 999 km/h or mph (before it was 255 kmh or mph)
- added settings for analog inputs averaging (it can be customized to make measurements faster or more stable):
v3-7-1_averaging_adc.jpg
v3-7-1_averaging_adc.jpg (97.49 KiB) Viewed 1968 times

- added manual data-logger (logging can be enabled or disabled from menu) with current memory state:
v3-7-1_manual_datalogger.jpg
v3-7-1_manual_datalogger.jpg (13.92 KiB) Viewed 1968 times


If you are interested with above functions then you can update your UTCOMP-3/UTCOMP-PRO manually.

UTCOMP-3 v3.7.1:
https://www.dropbox.com/s/5byoyhvxu227h ... 2.zip?dl=0

UTCOMP-PRO v3.7.1:
https://www.dropbox.com/s/kt0co0ru3qry6 ... 2.zip?dl=0

Please first update device firmware (check readme file for instruction) and next replace required files in software installation folder.

Kaldek
Posts: 35
Joined: Sun May 29, 2016 3:32 am
Has thanked: 4 times
Been thanked: 2 times

Re: Update v3.7 for UTCOMP-3 and UTCOMP-PRO

Postby Kaldek » Tue Apr 30, 2019 1:46 pm

Hi Artur, if we install 3.7.1 will it cause any issues with later updates such as 3.8?

ArT
Posts: 834
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 16 times
Been thanked: 80 times

Re: Update v3.7 for UTCOMP-3 and UTCOMP-PRO

Postby ArT » Tue Apr 30, 2019 2:36 pm

Don't worry, there will be no problems

Kaldek
Posts: 35
Joined: Sun May 29, 2016 3:32 am
Has thanked: 4 times
Been thanked: 2 times

Re: Update v3.7 for UTCOMP-3 and UTCOMP-PRO

Postby Kaldek » Wed May 01, 2019 4:38 am

Thanks. I installed 3.7.1 and greatly appreciate the ability to slow down my temperature readings.


Return to “Other”

Who is online

Users browsing this forum: No registered users and 0 guests

cron