Dear Customers - REVELTRONICS company will be closed from 13th Sept to 25th Sept. Support will be limited during this time. We are sorry for inconvenience. Thank you in advance for your patience.

Utcomp Pro forgets date

Here you can ask technical questions about UTCOMP-3 / UTCOMP-PRO compatibility and features.
Horst
Posts: 2
Joined: Sat Apr 13, 2019 2:40 pm
Has thanked: 1 time

Utcomp Pro forgets date

Postby Horst » Sat Apr 13, 2019 2:54 pm

Hi,

My Utomp Pro forgets the date after the ignition has been turned off.

I set the date to: 13.04.2019 , 14:40 -> turn off -> turn on and the date jumps up to 01.01.2019 , 00:00
I have tried it several times but it does not work.

The service reminder and the traveled distance etc are displayed correctly. So i dont know whats the problem.

What could it be?

ArT
Posts: 834
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 16 times
Been thanked: 80 times

Re: Utcomp Pro forgets date

Postby ArT » Mon Apr 15, 2019 1:23 pm

The problem is that you do not have connected constant +12V at pin A24. When you switch off ignition you should still have +12V at pin A24.

The other reason may be in settings (Settings -> preferences -> standbymode) - if you want to use clock you should select "power-safe" mode (NOT ultra power-safe where watch is disabled).

Horst
Posts: 2
Joined: Sat Apr 13, 2019 2:40 pm
Has thanked: 1 time

Re: Utcomp Pro forgets date

Postby Horst » Mon Apr 15, 2019 4:01 pm

Yes the "ultra power save" mode was my fault. Thanks a lot :)


Return to “UTCOMP technical support”

Who is online

Users browsing this forum: No registered users and 0 guests

cron