"Programmer is not connected"

Here you can ask technical questions about REVELPROG-IS and device/memory programming.
pksumo
Posts: 2
Joined: Fri Jun 28, 2019 1:25 pm

"Programmer is not connected"

Postby pksumo » Fri Jun 28, 2019 1:28 pm

The red "power" LED is flashing and software says "Programmer is not connected".
Used the cable delivered with the programmer.
Connected to a Microsoft Surface Pro 4 USB 3.0 port that works fine otherwise.
Any idea?
Thanks
Last edited by pksumo on Fri Jun 28, 2019 2:45 pm, edited 1 time in total.

pksumo
Posts: 2
Joined: Fri Jun 28, 2019 1:25 pm

Re: "Programmer is not connected"

Postby pksumo » Fri Jun 28, 2019 2:45 pm

Problem solved, the driver was not properly installed.

ArT
Posts: 846
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 17 times
Been thanked: 85 times

Re: "Programmer is not connected"

Postby ArT » Fri Jun 28, 2019 2:58 pm

On win10 driver should be installed from application (page 7 in manual)
https://www.youtube.com/watch?v=6AFD3yBsRNc


Return to “REVELPROG-IS technical support”

Who is online

Users browsing this forum: No registered users and 0 guests