MT25QL256A
MT25QL256A
it detects it, but ... the checksum shows 0x0000 in its reading, bad reading or is it protected?
- Attachments
-
- duda.jpg (726.01 KiB) Viewed 6605 times
-
ArT
- Posts: 1603
- Joined: Wed Mar 25, 2015 8:54 am
- Location: Warsaw, Poland
- Has thanked: 61 times
- Been thanked: 171 times
Re: MT25QL256A
Reading will be fine. Please recalculate checksum or change to CRC32
From some reason in v1.8.5 sometimes it does not recalculate checksum automaticaly for large flash devices and it should be fixed in update. CRC32 is working fine. When you select all (CTRL + A) checksum also will be correct. When you click on checksum label it should recalculate too.
From some reason in v1.8.5 sometimes it does not recalculate checksum automaticaly for large flash devices and it should be fixed in update. CRC32 is working fine. When you select all (CTRL + A) checksum also will be correct. When you click on checksum label it should recalculate too.
Re: MT25QL256A
ocurrs the same.
But I confirm that the bin is correct, because I have copied it to another flash and it works.
But I confirm that the bin is correct, because I have copied it to another flash and it works.
- Attachments
-
- duda2.jpg (332.92 KiB) Viewed 6597 times
You can change 1 byte, click CTRL + A and see if checksum changes too