I2C SPI Custom Script Programming [TUTORIAL & EXAMPLES]

Interesting examples and tutorials about REVELPROG-IS features and device programming
laptopuri
Posts: 2
Joined: Tue Jan 08, 2019 10:57 pm

Re: I2C SPI Custom Script Programming [TUTORIAL & EXAMPLES]

Postby laptopuri » Tue Jan 08, 2019 11:02 pm

We need a toool for reading and writing JTAG on varios laptops . Can revelprog read and write on this bus ?
Regards , Vlad
Attachments
jtag .PNG
jtag .PNG (85 KiB) Viewed 2964 times

ArT
Posts: 990
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 20 times
Been thanked: 95 times

Re: I2C SPI Custom Script Programming [TUTORIAL & EXAMPLES]

Postby ArT » Wed Jan 09, 2019 2:57 pm

Hi Vlad, unfortunately REVELPROG-IS does not support JTAG interface at the moment.

ArT
Posts: 990
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 20 times
Been thanked: 95 times

Re: I2C SPI Custom Script Programming [TUTORIAL & EXAMPLES]

Postby ArT » Tue Feb 12, 2019 12:26 pm

Since v1.8.1 REVELPROG-IS will be supporting 1-wire interface in custom script tool. Here is example for DS2436 battery chip: viewtopic.php?f=22&t=436&p=2143

ovidiugabrielstan
Posts: 1
Joined: Fri Jul 31, 2020 9:49 am

Re: I2C SPI Custom Script Programming [TUTORIAL & EXAMPLES]

Postby ovidiugabrielstan » Fri Jul 31, 2020 10:21 am

Hello, can you please help me with some details about the following problem: I would like to use revelprog-is programmer together with some other microcontroller programmers, using a .bat file. This would allow me to 'automate' the programming process of a custom made board. I am using the revelprog-is programmer to flash a binary file for a FPGA device, memory type ISSI IS25LP064, which works great using GUI.

Is it possible to use revelprog-is programmer from the command line? Something like C:\path\revelprog-is.exe <memory_type> <operation_type> <binary_file>

For example: C:\path\revelprog-is.exe IS25LP064 -Write C:\myBinFile.bin

If such a feature exists, can you please direct me to a manual/description? I can't use the scripting tool, as it would be a lot easier to just use the GUI for that matter.
If this feature isn't available, can you please plan it for a future release? It would make the revelprog-is programmer a must for many others I believe.

Thank you and have a nice day,
Ovidiu Gabriel

ArT
Posts: 990
Joined: Wed Mar 25, 2015 8:54 am
Location: Warsaw, Poland
Has thanked: 20 times
Been thanked: 95 times

Re: I2C SPI Custom Script Programming [TUTORIAL & EXAMPLES]

Postby ArT » Fri Jul 31, 2020 12:17 pm

Unfortunately REVELPROG-IS application is GUI based. We have in plans command line interface but it needs to write new app from scratch to make it GUI independent. We have it in plans but I can not promise any date at the moment so at the moment I recommend to find other solution. Please check also this subject viewtopic.php?f=22&t=415&start=10 last @bigendian post - he prepared command line software for his own (for linux) and it's working with few FLASH devices


Return to “Tutorials and Examples”

Who is online

Users browsing this forum: No registered users and 1 guest

cron